Star V SLG 1-LB Semi-Automatic Single-Head V-Grooving Machine
Single tape applicator and single cutter head, with manual adjustment.
Solid surface manufacturers
Making solid surface drop edges or cove backsplashes? Tape is automatically applied to the bottom of the sheet before V-grooves or miter cuts are made in the top. The tape holds the pieces together during folding and gluing, helping reduce separate preparation and handling steps. Ask about a one-pass cove cut with special cove tooling; we’ll confirm the setup for this model and your material.
Kitchen, cabinet and architectural millwork shops
For kitchen manufacturers, cabinet shops and architectural millwork: discuss miter folds for column wraps, buildups and floating shelves. We’ll match the tooling and groove direction to your finished profile.
See how taping, grooving and folding work
On this page: Applications · Tape and fold process · Specifications · Request a quote
Browse all V-grooving machines
The Star V SLG 1-LB is a semi-automatic, single-head V-grooving machine for shops producing miter-folded components, countertop edges and millwork profiles. Manual setup is paired with powered feed and automatic tape application, giving operators direct control over adjustments while the machine feeds the workpiece through the cutting area.
How taping and folding work
With the sheet positioned for machining, tape is automatically applied to its bottom before the cuts are made. V-grooves or miter cuts are machined into the top of the sheet, leaving the tape intact underneath. The tape acts as a hinge and holds the pieces together during folding and gluing.
Controlled setup with automatic feed and taping
- Manual cutter positioning via hand wheels, with ProScale DRO feedback for side movement.
- Automatic tape application supports the hinge used in the miter-folding process.
- Powered double-belt feed moves material through the cutting area after setup.
- One 10 HP cutter motor and one automatic tape applicator support single-head production.
Applications for your production shop
For shops producing solid surface countertop drop edges, the single-head SLG 1-LB combines manual positioning with powered feed and automatic taping. Review solid surface countertop applications; confirm special tooling and the required setup for cove backsplash work.
For kitchen manufacturers and cabinet shops, discuss miter-folded floating shelves, column wraps and edge buildups. Explore cabinet and millwork applications and send a drawing to confirm suitability.
Choosing a setup for your countertop material: Review our solid surface brand and pattern guide before planning a folded edge. Share your color code, sheet thickness and part drawing to confirm the single-head operation, tooling and assembly requirements.
Key specifications
- Cutting system: One 10 HP motor at 3,600 RPM; 9-1/4-inch cutter-head diameter.
- Feed: Double belt with variable DC drive, 0–50 FPM.
- Cut position from fixed fence: 1/4–15 inches on the listed configuration.
- Workpiece thickness: 1/4–1 3/16 inches; minimum board length 18 inches.
- Construction: Stainless steel roller bed and tubular welded frame.
- Approximate dimensions and weight: 138 × 63 × 72 inches (L × W × H); 2,600 lbs.
- Electrical: 208 or 460V, 3 phase; typical amperage 460V: 25A / 208V: 42A.
- Air and dust extraction: 60 PSI; 197 CFM at a 3-inch port.
- Listed warranty: 2 years; confirm applicable terms with your quote.
Configuration and machine selection
Ask about 25-, 30-, 36- and 40-inch throat options and reverse-feed configurations. Cutter heads for V-groove, cove, lock-miter and combination profiles are sold separately; confirm the tooling required for your part.
Download the SLG 1-LB specification sheet (PDF). Compare the Star V V-grooving machine range or consider the servo-positioned SLG-1000.
Request a quote or demonstration: Call 678-925-3556 or email Star V USA. Include your material, thickness, finished profile, production volume and available electrical service so we can discuss a suitable configuration.
*Specifications are for general reference, are subject to change and may vary by configuration. Confirm exact dimensions, electrical service, compressed air, dust collection, tooling and installation requirements with Star V Machinery before purchase or site preparation.
Talk with Star V USA
Request information on Star V SLG 1-LB Semi-Automatic Single-Head V-Grooving Machine
Tell us about your material, application and production goals. Your machine is selected below; you can change it if needed.
Loading your machine inquiry form…
STAR V SPECIFICATION SHEET DATA
SLG 1-LB Technical Specifications

- Cutter heads
- Single
- Cutter motors
- 10 HP at 3,600 RPM
- Cutter diameter
- 9-1/4 in
- Feed system
- Double belt, variable DC drive
- Feed speed
- 0–50 FPM
- Tape application
- Single automatic
- Positioning
- Hand wheel / ProScale DRO feedback
- Cut from fixed fence
- 1/4–15 in
- Minimum board length
- 18 in
- Board thickness
- 1/4–1 3/16 in
- Dimensions (approx.)
- 138 × 63 × 72 in
- Weight (approx.)
- 2,600 lbs
- Electrical
- 208 or 460V, 3 phase
- Typical amperage
- 460V: 25A / 208V: 42A
- Compressed air
- 60 PSI
- Dust extraction
- 197 CFM at 3 in port
- Listed warranty
- 2 years; confirm terms with your quote
Specifications shown are for general reference and subject to change. Exact machine dimensions, electrical/power requirements, compressed air requirements, dust collection requirements and other specifications may vary by machine configuration. Confirm all requirements for your specific machine with Star V Machinery before purchase, site preparation and installation.
Download SLG 1-LB specification sheet (PDF) Request a Quote or Demonstration





















