Star V SLG 2-LB Semi-Automatic Dual-Head V-Grooving Machine
Two tape applicators and two cutter heads, with manual adjustment.
Solid surface manufacturers
Making solid surface drop edges or cove backsplashes? Tape is automatically applied to the bottom of the sheet before V-grooves or miter cuts are made in the top. The tape holds the pieces together during folding and gluing, helping reduce separate preparation and handling steps. Ask about a one-pass cove cut with special cove tooling; we’ll confirm the setup for this model and your material.
Kitchen, cabinet and architectural millwork shops
For kitchen manufacturers, cabinet shops and architectural millwork: discuss miter folds for column wraps, buildups and floating shelves. We’ll match the tooling and groove direction to your finished profile.
See how taping, grooving and folding work
On this page: Applications · Tape and fold process · Specifications · Request a quote
Browse all V-grooving machines
The Star V SLG 2-LB is a semi-automatic, dual-head V-grooving machine with two cutting stations and two automatic tape applicators. It is designed for fabricators who need a two-head setup for their profiles while retaining manual positioning controls and a powered feed system.
How taping and folding work
With the sheet positioned for machining, tape is automatically applied to its bottom before the cuts are made. V-grooves or miter cuts are machined into the top of the sheet, leaving the tape intact underneath. The tape acts as a hinge and holds the pieces together during folding and gluing.
Controlled setup with automatic feed and taping
- Manual cutter positioning via hand wheels, with ProScale DRO feedback for side movement.
- Automatic tape application supports the hinge used in the miter-folding process.
- Powered double-belt feed moves material through the cutting area after setup.
- Two 10 HP cutter motors and two tape stations support dual-head production configurations.
Applications for your production shop
Solid surface countertop fabricators can evaluate this two-head platform for drop edges and cove backsplash profiles, including one-pass cove cuts with special tooling. Review the solid surface production guide and confirm the required configuration.
Cabinet shops and architectural millwork manufacturers can discuss folded shelves, column wraps and buildups. See the miter-folding applications guide for project ideas.
Planning solid surface production: Match the two-head setup to the edges and backsplash profiles your shop repeats. Review material guidance for Corian, HIMACS, Wilsonart and Everform fabricators, then supply a sample and finished profile to confirm the cutter arrangement.
Key specifications
- Cutting system: Two 10 HP motors at 3,600 RPM; 9-1/4-inch cutter-head diameter.
- Feed: Double belt with variable DC drive, 0–50 FPM.
- Cut position from fixed fence: 1/4–15 inches on the listed configuration.
- Workpiece thickness: 1/4–1 3/16 inches; minimum board length 20 inches.
- Construction: Stainless steel roller bed and tubular welded frame.
- Approximate dimensions and weight: 138 × 63 × 72 inches (L × W × H); 3,200 lbs.
- Electrical: 208 or 460V, 3 phase; typical amperage 460V: 38A / 208V: 69A.
- Air and dust extraction: 100 PSI; 785 CFM at a 6-inch port.
- Listed warranty: 2 years; confirm applicable terms with your quote.
Configuration and machine selection
Ask about 25-, 30-, 36- and 40-inch throat options and reverse-feed configurations. Cutter heads for V-groove, cove, lock-miter and combination profiles are sold separately; confirm the tooling required for your part.
Download the SLG 2-LB specification sheet (PDF). Compare the Star V V-grooving machine range or compare the fully automatic SLG-2000.
Request a quote or demonstration: Call 678-925-3556 or email Star V USA. Include your material, thickness, finished profile, production volume and available electrical service so we can discuss a suitable configuration.
*Specifications are for general reference, are subject to change and may vary by configuration. Confirm exact dimensions, electrical service, compressed air, dust collection, tooling and installation requirements with Star V Machinery before purchase or site preparation.
Talk with Star V USA
Request information on Star V SLG 2-LB Semi-Automatic Dual-Head V-Grooving Machine
Tell us about your material, application and production goals. Your machine is selected below; you can change it if needed.
Loading your machine inquiry form…
STAR V SPECIFICATION SHEET DATA
SLG 2-LB Technical Specifications

- Cutter heads
- Dual
- Cutter motors
- (2) 10 HP at 3,600 RPM
- Cutter diameter
- 9-1/4 in
- Feed system
- Double belt, variable DC drive
- Feed speed
- 0–50 FPM
- Tape application
- Two automatic applicators
- Positioning
- Hand wheel / ProScale DRO feedback
- Cut from fixed fence
- 1/4–15 in
- Minimum board length
- 20 in
- Board thickness
- 1/4–1 3/16 in
- Dimensions (approx.)
- 138 × 63 × 72 in
- Weight (approx.)
- 3,200 lbs
- Electrical
- 208 or 460V, 3 phase
- Typical amperage
- 460V: 38A / 208V: 69A
- Compressed air
- 100 PSI
- Dust extraction
- 785 CFM at 6 in port
- Listed warranty
- 2 years; confirm terms with your quote
Specifications shown are for general reference and subject to change. Exact machine dimensions, electrical/power requirements, compressed air requirements, dust collection requirements and other specifications may vary by machine configuration. Confirm all requirements for your specific machine with Star V Machinery before purchase, site preparation and installation.
Download SLG 2-LB specification sheet (PDF) Request a Quote or Demonstration





























